Ricoh D009 - Page 986

Bit Switches
D346 96 SM
1 0 0 0 19.2k
1 0 0 1 21.6k
1 0 1 0 24.0k
1 0 1 1 26.4k
1 1 0 0 28.8k
1 1 0 1 31.2k
1 1 1 0 33.6k
Other settings - Not used
Modem types available for reception
Bit 7 Bit 6 Bit 5 Bit 4 Setting
0 0 0 1 V.27ter
0 0 1 0 V.27ter,V.29
0 0 1 1
V.27ter,
V.29, V.33
0 1 0 0
V.27ter,
V.29,
V.17/V.33
0 1 0 1
V.27ter,
V.29,
V.17/V33,
V.34
4-7
Other settings - Not used
 The setting of these bits is used to
inform the transmitting terminal of the
available modem type for the machine
in receive mode.
 If V.34 is not selected, V.8 protocol must
be disabled manually.
Cross reference:
V.8 protocol on/off - G3 switch 03, bit2
G3 Switch 07 [SP No. 1-105-008]
No FUNCTION COMMENTS
0-1 PSTN cable equalizer Use a higher setting if there is signal loss at higher