SC Tables
D023/D025 3-70 SM Appendix
No. Type Details (Symptom, Possible Cause, Troubleshooting Procedures)
Stack pressure solenoid error
The stack pressure solenoid in the finisher is not operating.
Solenoid harness loose, broken
Solenoid obstructed
Stack height sensor dirty, harness loose, broke
Solenoid defective
Stack height sensor defective
798
-9
B
1. Check or replace the solenoid harness.
2. Check for blockages in the stack pressure mechanism.
1. Replace the stack height sensor.
To Next Page
Loading...
