System Service Mode
SM Appendix 8-3 D023/D025
Appendix
SP Mode
Tables
[Paper Buckle] Paper Buckle Adjustment
(Tray Location, Paper Type), Paper Type: N: Normal, TH: Thick
1003
Adjusts the amount of paper buckle at the registration roller by changing the
paper feed timing.
002 Paper Tray1: Plain *ENG
[–9 to 5 / -2 / 1 mm/step]
003 Tray1: Middle Thick *ENG
[–9 to 5 / -1 / 1 mm/step]
004 Paper Tray1: Thick1 *ENG
007 Paper Tray2/3/4/5/LCT: Plain *ENG
[–9 to 5 / -2 / 1 mm/step]
008 Tray 2/3/4/5/LCT: Middle Thick *ENG
[–9 to 5 / -1 / 1 mm/step]
009
Paper Tray2/3/4/5/LCT: Thick
1
*ENG
[–9 to 5 / -2 / 1 mm/step]
012 By-pass: Plain *ENG
013 By-pass: Middle Thick *ENG
[–9 to 5 / 0 / 1 mm/step]
014 By-pass: Thick 1 *ENG
[–9 to 5 / -2 / 1 mm/step]
018 Duplex: Plain *ENG
019 Duplex: Middle Thick *ENG
[–9 to 5 / 0 / 1 mm/step]
020 Duplex: Thick 1 *ENG
[–9 to 5 / -2 / 1 mm/step]
021 Paper Tray1: Plain: 1200 *ENG
022 Tray1: Middle Thick: 1200 *ENG
023 Tray 2/3/4/5LCT: Plain: 1200 *ENG
024 Tray 2/3/4/5LCT: Mid: 1200 *ENG
025 By-pass: Plain: 1200 *ENG
026 By-pass: Middle Thick: 1200 *ENG
[–9 to 5 / 0 / 1 mm/step]
To Next Page
