Ricoh D025 - Page 600

System Service Mode
D023/D025 8-4 SM Appendix
027 Paper Tray1: Thick1: 1200 *ENG
028
Paper Tray2/3/4/5/LCT: Thick
1:1200
*ENG
029 By-pass: Thick 1: 1200 *ENG
[–9 to 5 / -2 / 1 mm/step]
030 Duplex: Plain: 1200 *ENG
031 Duplex: Middle Thick: 1200 *ENG
[–9 to 5 / 0 / 1 mm/step]
032 Duplex: Thick 1: 1200 *ENG
[–9 to 5 / -2 / 1 mm/step]
1007 [By-Pass Size Detection] By-Pass Size Detection Display
LG *ENG
[0 or 1 / 0 / 1 ]
0: Disable, 1: Enable
001
Enables or disables the automatic paper size detection function of the by-pass
tray.
This SP determines what paper size the machine detects if the detected size is
less than 8.5”.
0: OFF (Letter/SEF), 1: ON (Legal/SEF)
1101 [Flicker Control]
Flicker Control *ENG
[0 or 1 / 0 / 1 /step]
001
-