System Service Mode
SM Appendix 8-5 D023/D025
Appendix
SP Mode
Tables
1103 [Fusing Idling] Fusing Idling Adjustment
011 Idling Start Temp. *ENG
[0 to 75 / 75 / 1 deg/step]
012 Forced Idling Stop *ENG
[0 to 1 / 0 / 1 /step]
013 Forced Idling Stop Temp. *ENG
[100 to 180 / 100 / 1 deg/step]
014 Minimum Idling Time *ENG
[0 to 10 / 0 / 1 sec/step]
016 Extra Idling Time (L) *ENG
Specifies how long the extra idling
operation is executed for each
environment.
[0 to 60 / 0 / 1 sec/step]
Each environment is determined
with SP1112-001 and 002.
017 Extra Idling Time (H) *ENG
018 Extra Idling Time (M) *ENG
[0 to 60 / 0 / 1 sec/step]
019 Pressure TempThreshold *ENG
[0 to 160 / 100 / 1 deg/step]
020 Control Switch Temp *ENG
[0 to 25 / 25 / 1 deg/step]
1104 [Idling Before Job]
001 Environment Threshold *ENG
[0 to 2 / 2 / 1 /step]
002 Pressure Temp Threshold *ENG
[0 to 160 / 150 / 1 /step]
003 Idling Time: BW *ENG
004 Idling Time: FC *ENG
[0 to 10 / 0 / 1 sec/step]
005 Idling Time: MiddleThick: BW *ENG
006 Idling Time: MiddleThick: FC *ENG
[0 to 10 / 2 / 1 sec/step]
007 Pressure Temp: Paper Feed *ENG
[0 to 130 / 50/ 1 deg/step]
To Next Page
