Ricoh D025 - Page 709

System Service Mode
SM Appendix 8-113 D023/D025
Appendix
SP Mode
Tables
007
Paper Transfer: 2nd Side:
S2
*ENG
[100 to 600 / 100 / 5%/step]
297 mm ≥ S2 size ≥ 275 mm (Paper
width)
008
Paper Transfer: 2nd Side:
S2
*ENG
[100 to 600 / 430 / 5%/step]
275 mm ≥ S3 size ≥ 210 mm (Paper
width)
009
Paper Transfer: 2nd Side:
S4
*ENG
[100 to 600 / 100 / 5%/step]
210 mm ≥ S4 size ≥ 148 mm (Paper
width)
010
Paper Transfer: 2nd Side:
S4
*ENG
[100 to 600 / 600 / 5%/step]
148 mm ≥ S5 size (Paper width)
[Thick 3: Leading Edge Correction] Thick 3 Paper: Leading Edge Correction
2654
Adjusts the correction to the paper transfer roller current at the paper leading
edge in each mode. SP2651 and SP2652 are multiplied by these SP values.
 The paper leading edge area can be adjusted with SP2655.
001 Paper Transfer: 1st Side *ENG
002 Separation DC: 1st Page *ENG
[0 to 400 / 100 / 5%/step]
2654
Adjusts the correction to the discharge plate current at the paper leading edge
in each mode. SP2650 is multiplied by these SP values.
 The paper leading edge area can be adjusted with SP2655.
003 Paper Transfer: 2nd Side *ENG
004 Separation DC: 2nd Page *ENG
[0 to 400 / 100 / 5%/step]