System Service Mode
D023/D025 8-114 SM Appendix
[Thick 3: Switch Timing: Lead. Edge]
2655
Adjusts the bias/ voltage switch timing of the paper transfer roller/ discharge
plate at the paper leading edge between the erase margin area and the image
area.
001 Paper Transfer: 1st Side *ENG
002 Separation DC: 1st Page *ENG
003 Paper Transfer: 2nd Side *ENG
004 Separation DC: 2nd Page *ENG
[0 to 50 / 0 / 2 mm/step]
[Thick 3: Trailing Edge Correction] Thick 3 Paper: Trailing Edge Correction
2656
Adjusts the correction to the paper transfer roller current for the paper trailing
edge in each mode. SP2651 and SP2652 are multiplied by these SP values.
The paper trailing edge area can be adjusted with SP2657.
001 Paper Transfer: 1st Side *ENG
002 Paper Transfer: 2nd Side *ENG
[0 to 400 / 100 / 5%/step]
003 Separation DC: 1st Page *ENG
[0 to 400 / 100 / 5%/step]
004 Separation DC: 2st Page *ENG
[0 to 400 / 100 / 5%/step]
To Next Page
Loading...
