System Service Mode
SM Appendix 8-115 D023/D025
Appendix
SP Mode
Tables
[Thick 3: Trailing Edge Correction]
2657
Adjusts the bias/voltage switch timing of the paper transfer roller/discharge
plate at the paper trailing edge between the erase margin area and the image
area.
001 Paper Transfer: 1st Side *ENG
002 Paper Transfer: 2nd Side *ENG
003 Separation DC: 1st Page *ENG
[0 to 50 / 0 / 2 mm/step]
004 Separation DC: 2nd Page *ENG
[0 to 50 / 0 / 2 mm/step]
[Thick 3: Environment Correction] Thick 3 Paper: MM Environment
Coefficient Adjustment
2660
Adjusts the environment coefficient for each mode. When the environment is
detected as MM, SP2651 and SP2652 are multiplied by these SP values.
001 Separation DC: 1st Page *ENG
002 *ENG
[1 to 60 / 22 / 1 /step]
2660
Adjusts the environment coefficient for each mode. When the environment is
detected as MM, SP2650 is multiplied by these SP values.
003 Paper Transfer: Thick 3: 2nd Side *ENG
004 Separation DC: Thick 3: 2nd Side: *ENG
[1 to 60 / 11 / 1 /step]
005 Paper Transfer: FC: 1st Side *ENG
[1 to 60 / 55 / 1 /step]
To Next Page
Loading...
