Ricoh D025 - Page 722

System Service Mode
D023/D025 8-126 SM Appendix
[Special 2: Switch Timing: Lead. Edge]
2822
Adjusts the bias/ voltage switch timing of the paper transfer roller/ discharge
plate at the paper leading edge between the erase margin area and the image
area.
Plain: 154 mm/sec, Fine: 77 mm/sec
001 Paper Transfer: Plain: 1st Side *ENG
002 Paper Transfer: Plain: 2nd Side *ENG
003 Paper Transfer: Plain: 1st Side *ENG
005 Separation DC: Plain: 1st Side *ENG
006 Separation DC: Plain: 2nd Side *ENG
007 Separation DC: Plain: 1st Side *ENG
[0 to 50 / 0 / 2 mm/step]
[Special 2: Trailing Edge Correction] Special 2 Paper: Trailing Edge
Correction
2823
Adjusts the correction to the paper transfer roller current for the paper trailing
edge in each mode. SP2803 and SP2807 are multiplied by these SP values.
Plain: 154 mm/sec, Fine: 77 mm/sec
 The paper trailing edge area can be adjusted with SP2824.
001 Paper Transfer: Plain: 1st Side *ENG
002 Paper Transfer: Plain: 2nd Side *ENG
[0 to 400 / 100 / 5%/step]
003 Paper Transfer: Plain: 1st Side *ENG
005 Separation DC: Plain: 1st Side *ENG
006 Separation DC: Plain: 2nd Side *ENG
007 Separation DC: Plain: 1st Side *ENG
[0 to 400 / 100 / 5%/step]