Ricoh D025 - Page 726

System Service Mode
D023/D025 8-130 SM Appendix
010
Paper Transfer: Thick 1: 2nd
Side: S3
*ENG
[100 to 600 / 140 / 5%/step]
275 mm ≥ S3 size ≥ 210 mm
(Paper width)
013
Paper Transfer: Thick 1: 1st Side:
S4
*ENG
[100 to 600 / 160 / 5%/step]
210 mm ≥ S4 size ≥ 148 mm
(Paper width)
014
Paper Transfer: Thick 1: 2nd
Side: S4
*ENG
[100 to 600 / 160 / 5%/step]
210 mm ≥ S4 size ≥ 148 mm
(Paper width)
017
Paper Transfer: Thick 1: 1st Side:
S5
*ENG
[100 to 600 / 180 / 5%/step]
148 mm ≥ S5 size (Paper
width)
018
Paper Transfer: Thick 1: 2nd
Side: S5
*ENG
[100 to 600 / 180 / 5%/step]
148 mm ≥ S5 size (Paper
width)
[Special 3: Leading Edge Correction] Special 3 Paper: Leading Edge
Correction
2871
Adjusts the correction to the paper transfer roller current at the paper leading
edge in each mode. SP2852 and SP2857 are multiplied by these SP values.
Thick 1 and Thick 2&Fine: 77 mm/sec
 The paper leading edge area can be adjusted with SP2872.
001 Paper Transfer: Thick 1: 1st Side *ENG
002 Paper Transfer: Thick 1: 2nd Side *ENG
[0 to 400 / 100 / 5%/step]
003 Paper Transfer: Thick 1: 1st Side *ENG
[0 to 400 / 100 / 5%/step]