System Service Mode
D023/D025 8-134 SM Appendix
[Image Transfer Roller Brake Time]
2903
Adjusts the time when the image transfer belt motor reverses from normal
rotation after job end. DFU
Plain: 154 mm/sec, Thick 1 and Thick 2&Fine: 77 mm/sec
003 Plain *ENG
004 Thick 1 *ENG
005 Thick 2 & FINE *ENG
[300 to 1500 / 500 / 10 msec/step]
[OPC Drum Reverse Time]
2904
Adjusts the time for how long the image transfer belt motor reverses after job
end. DFU
003 All *ENG
[0 to 200 / 30 / 10 msec/step]
[Phase Angle]
2906
DFU
001 Y Drum *ENG
002 C Drum *ENG
003 M Drum *ENG
004 K Drum *ENG
[0 to 359 / 0 / 1 deg/step]
005 Stop Position *ENG
[0 to 60 / 0 / 6 deg/step]
To Next Page
Loading...
