System Service Mode
SM Appendix 8-135 D023/D025
Appendix
SP Mode
Tables
[Amplitude Setting]
2906
DFU
006 Y Drum *ENG
007 C Drum
008 M Drum
009 K Drum
[0 to 100 / 0.0 / 0.1 μm/step]
[ACS Setting (FC to Bk)]
2907
Adjusts the threshold for moving away the image transfer belt from the color
PCUs. This SP moves the image transfer belt away from the color PCUs when
the number of B/W image printouts reaches the number of sheets specified
with this SP after consecutive full color image printouts in the full color mode.
If this SP is set to "0", the image transfer belt does not move away.
001 Continuous Bk Pages *ENG
[0 to 10 / 0 / 1 sheet/step]
[Gain Adjust] Gain Adjustment of Image Transfer Belt Motor
2908
DFU
001 230 mm/sec *ENG
[0 or 1 / 0 / 1/step]]
0: High speed (Low level)
1: Low speed (High level)
003 115 mm/sec *ENG
004 77 mm/sec *ENG
To Next Page
Loading...
