Ricoh D025 - Page 838

System Service Mode
D023/D025 8-242 SM Appendix
[SC/Alarm Setting]
*CTL -
5515
With NRS (New Remote Service) in use, these SP codes can be set to issue
an SC call when an SC error occurs. If this SP is switched off, the SC call is
not issued when an SC error occurs.
001 SC Call
002 Service Parts Near End Call
003 Service Parts End Call
004 User Call
[0 or 1 / 1 / - ]
0: Off
1: On
006 Communication Test Call
007 Machine Information Notice
008 Alarm Notice
009 Non Genuine Toner Alarm
010 Supply Automatic Ordering Call
011 Supply Management Report Call
012 Jam/Door Open Call
[0 or 1 / 1 / - ]
0: Off
1: On
5516 [Individual PM Part Alarm Call]
*CTL -
001 Disable/ Enable Setting
Enables or disables the PM part
alarm call.
[0 or 1 / 1 / - ]
0: Not Send, 1: Send