Ricoh D025 - Page 839

System Service Mode
SM Appendix 8-243 D023/D025
Appendix
SP Mode
Tables
5610 [Base Gamma Control Point: Command]
Factory Setting - -
004
Recalls the factory settings.
Restore - -
005
Overwrites the current values onto the factory settings.
Restore - -
006
Recalls the previous settings.
5611 [Toner Color in 2C]
B-C *ENG
[0 to 128 / 100 / 1 /step]
128: Darkest density
001
Adjusts the Cyan correction value of the blue signal in two-color mode.
B-M *ENG
[0 to 128 / 100 / 1 /step]
128: Darkest density
002
Adjusts the Magenta correction value of the blue signal in two-color mode.
G-C *ENG
[0 to 128 / 100 / 1 /step]
128: Darkest density
003
Adjusts the Cyan correction value of the blue signal in two-color mode.
G-Y *ENG
[0 to 128 / 100 / 1 /step]
128: Darkest density
004
Adjusts the Yellow correction value of the blue signal in two-color mode.