Ricoh D025 - Page 853

System Service Mode
SM Appendix 8-257 D023/D025
Appendix
SP Mode
Tables
Outside Line/Outgoing Number
154
The SP sets the number that switches to PSTN for the outside connection for
Cumin-M in a system that employs a PBX (internal line).
 If the execution of SP5816 151 has succeeded and Cumin-M has
connected to the external line, this SP display is completely blank.
 If Cumin-M has connected to an internal line, then the number of the
connection to the external line is displayed.
 If Cumin-M has connected to an external line, a comma is displayed with
the number. The comma is inserted for a 2 sec. pause.
 The number setting for the external line can be entered manually
(including commas).
Dial Up User Name
156
Use this SP to set a user name for access to remote dial up. Follow these
rules when setting a user name:
 Name length: Up to 32 characters
 Spaces and # allowed but the entire entry must be enclosed by double
quotation marks (").
Dial Up Password
157
Use this SP to set a password for access to remote dial up. Follow these
rules when setting a user name:
 Name length: Up to 32 characters
 Spaces and # allowed but the entire entry must be enclosed by double
quotation marks (").
Local Phone Number
161
Use this SP to set the telephone number of the line where Cumin-M is
connected. This number is transmitted to and used by the Call Center to
return calls.
Limit: 24 numbers (numbers only)