System Service Mode
SM Appendix 8-259 D023/D025
Appendix
SP Mode
Tables
Retransmission Limit
174
Normally, it is best to allow unlimited time for certification and ID2 update
requests, and for the notification that the certification has been completed.
However, Cumin-M generates charges based on transmission time for the
customer, so a limit is placed upon the time allowed for these transactions.
If these transactions cannot be completed within the allowed time, do this SP
to cancel the time restriction.
FAX TX Priority -
187
This SP determines whether pushing the off-hook button will interrupt a
Cumin-M transmission in progress to open the line for fax transaction. This
SP can be used only if SP5816 164 is set to "0".
[0 or 1/ 0 / - ]
0: Disable, 1: Enable
200 Manual Polling - Executes the manual polling.
Regist: Status
201
Displays a number that indicates the status of the NRS service device.
0: Neither the NRS device nor Cumin device are set.
1: The Cumin device is being set. Only Box registration is completed. In this
status the Basil unit cannot answer a polling request.
2: The Cumin device is set. In this status the Basil unit cannot answer a
polling request.
3: The NRS device is being set. In this status the Cumin device cannot be set.
4: The NRS module has not started.
202 Letter Number
Allows entry of the number of the request needed
for the Cumin device.
203 Confirm Execute Executes the inquiry request to the NRS GW URL.
To Next Page
Loading...
