System Service Mode
SM Appendix 8-295 D023/D025
Appendix
SP Mode
Tables
5967 [Copy Server Set Function]
*CTL
0: ON, 1: OFF
Enables and disables the document server. This is a security measure that
prevents image data from being left in the temporary area of the HDD. After
changing this setting, you must switch the main switch off and on to enable the
new setting.
[Cherry Server]
5974
Specifies which version of ScanRouter, “Lite” or “Full”, is installed.
001 Cherry Server
*CTL
[0 or 1 / 0 / – ]
0: Lite
1: Full
[Device Setting]
5985
The NIC and USB support features are built into the GW controller. Use this
SP to enable and disable these features. In order to use the NIC and USB
functions built into the controller board, these SP codes must be set to "1".
001
On Board NIC
[0 to 2 / 0 / 1 /step]
0: Disable, 1: Enable, 2: Function limitation
When the "Function limitation" is set, "On board NIC" is
limited only for the NRS or LDAP/NT authentication.
Other network applications such as
WebImageMonitor, NRS or LDAP/NT
authentication are not available when this SP is
set to "2". Even though you can change the initial
settings of those network applications, the
settings do not work.
002 On Board USB
[0 or 1 / 0 / 1/step]
0: Disable, 1: Enable
⇒
Rev. 09/17/2009
To Next Page
Loading...
