Ricoh Interactive Whiteboard Controller Type 2 User Manual

2. Click [Device Settings Management].
3. Click [Set as Synchronization Source for Device Settings].
4. Click [Upload] in "Synchronization Destination Management".
5. Select the list of destination whiteboards to be synchronized.
Import of the list begins. When the import is complete, a message is displayed.
• For details about how to create a list, see page 239 "Creating a List of Destination
Whiteboards to Synchronize".
6. Click [OK].
• The source synchronizing whiteboard cannot be a destination whiteboard for other whiteboards.
Also, a synchronized destination whiteboard cannot synchronize its settings with other
whiteboards.
• If the synchronization setting is enabled, the results of the synchronization are displayed when you
open the Web page of the synchronized destination whiteboards.
Creating a List of Destination Whiteboards to Synchronize
Use a text editor, spreadsheet software, or other similar application to create a synchronization
destination list.
1. In the first row, enter the label for the column. In the second and subsequent rows, enter
the corresponding information for each destination whiteboard that you want to
synchronize.
Up to 200 entries can be added from the second line.
XXX.XXX.XX.X
XXX.XXX.XX.XX
address
XXX.XXX.XX.XX
XXX.XXX.XX.XXX
DWJ016
2
1
1. Label row
Enter "address".
2. address column
Enter the IP address or host name of the destination whiteboard.
Managing the Device Settings
239

Ricoh Interactive Whiteboard Controller Type 2 Specifications

General

Brand	Ricoh
Model	Interactive Whiteboard Controller Type 2
Category	Controller
Language	English