Ricoh MP C307 User Manual

2.Mechanism
31
Controlling the Power Supply
Exiting Energy Saving Modes
Because this model of Smart Operation Panel has no hardware keys, the MFP exits from energy saving mode
when the user does one of the following:
• Touches the display panel
• Lifts the ADF
• Sets an original in the ADF
Screen Startup Mode
Startup Modes
There are two screen startup modes. The factory default setting is Normal.
1. Normal
This is the standard startup mode. When the main power of the MFP is turned ON, the control panel starts up
using less power compared to Quick mode.
2. Quick
By preparing for the next startup when the machine shuts down, the control panel starts up faster than in
Normal mode.
Changing the Screen Startup Mode
Screen Startup Mode can be changed in Screen Features.
Select [Screen Features] > [SYSTEM] > [Screen Device Settings] > [Screen Startup Mode], and then select
[Normal] or [Quick].
• In the following cases, the control panel starts up in Normal mode even if [Quick] is selected.
• The power cord has been disconnected from the power outlet after the last shutdown.
• The MFP is turned ON after being turned OFF due to reasons such as a power failure.
• The MFP was not properly shut down the last time it was turned OFF.

Ricoh MP C307 Specifications

General

Type	Multifunction Printer
Functions	Print, Copy, Scan, Fax
Print Technology	Laser
Print Resolution	1200 x 1200 dpi
Maximum Paper Size	A4
Duplex Printing	Yes
Scan Resolution	600 x 600 dpi
Mobile Printing	Apple AirPrint, Google Cloud Print, Mopria
Operating Systems Supported	Windows, Mac OS, Linux
Print Speed (Black)	30 ppm
Print Speed (Color)	30 ppm
Standard Paper Capacity	350 sheets
Supported Paper Sizes	A4, A5, A6, B5, B6, Letter, Legal
Scanner Type	Flatbed with ADF (Automatic Document Feeder)
Copier Speed (Black)	30 cpm
Copier Speed (Color)	30 cpm
Copy Resolution	Up to 600 dpi
Zoom Range	25% to 400%
Connectivity	Ethernet, USB
Max. Paper Capacity	1, 350 sheets
Display	10.1-inch color touchscreen