Ricoh MP C307 User Manual

PM/Yield Parts Settings
170
PM/Yield Parts Settings
Replacement Procedure of the PM/Yield Parts
There are two ways to reset the PM counter for this machine.
• Method 1: Reset by SP3-701 (New Unit Detection). This is the conventional method
• Method 2: Reset by [PM Counter / New Unit Set] Menu
Method 2 is recommended for its ease of operation.
For the following units, there is a new unit detection mechanism. It is not necessary to reset PM counters.
• Fusing unit
• PCDU
• Waste toner bottle (When the bottle is replaced AFTER a waste toner full or near-full message appears
on the operation panel)
Method 1: By SP3-701 (New Unit Detection)
1. Enter the SP mode.
2. Output the SMC log data using one of the following ways:
a) Execute SP5-990-001 to print SMC log data.
b) Execute SP5-992-001 to save SMC log data to an SD card. (Refer to "SMC List Card Save Function")
You can print out the PM counter list as follows.
1. In the SP mode menu, press [PM Counter / New Unit Set].
2. Press [Counterlist print out].

Ricoh MP C307 Specifications

General

Type	Multifunction Printer
Functions	Print, Copy, Scan, Fax
Print Technology	Laser
Print Resolution	1200 x 1200 dpi
Maximum Paper Size	A4
Duplex Printing	Yes
Scan Resolution	600 x 600 dpi
Mobile Printing	Apple AirPrint, Google Cloud Print, Mopria
Operating Systems Supported	Windows, Mac OS, Linux
Print Speed (Black)	30 ppm
Print Speed (Color)	30 ppm
Standard Paper Capacity	350 sheets
Supported Paper Sizes	A4, A5, A6, B5, B6, Letter, Legal
Scanner Type	Flatbed with ADF (Automatic Document Feeder)
Copier Speed (Black)	30 cpm
Copier Speed (Color)	30 cpm
Copy Resolution	Up to 600 dpi
Zoom Range	25% to 400%
Connectivity	Ethernet, USB
Max. Paper Capacity	1, 350 sheets
Display	10.1-inch color touchscreen