Ricoh MP C307

Anti-condensation Heater (Mainframe)
80
Anti-condensation Heater (Mainframe)
Accessory Check
All the accessories required to install the anti-condensation heater for mainframe are available as the following
parts. Order these separately from the heater.
• These part numbers are correct as of November, 2016. Refer to the “Option” section in the
mainframe’s parts catalog to check the latest part numbers.
• The shape of the actual parts may differ from the photo.
No. Description Q'ty Part Number
1 Junction Harness 1 D1965265*
1
2 Heater Power Switch 1 12042570
3 Clamp 1 11050511
4 Screw 1 08010231
5 Heater kit 1 D1175097: EU/AA/KOR/CHN
D1175091: NA/TWN
• *1 This harness (P/N: D1955265) is also used as a harness for Anti-condensation Heater for optional
paper feed unit, and Anti-condensation Heater for mainframe paper feed tray. If you have already
ordered this harness for these heaters, it is not necessary to order this harness again at this time.