Anti-condensation Heater (Optional Paper Feed Unit)
92
Anti-condensation Heater (Optional Paper Feed Unit)
Accessory Check
Check the quantity and condition of the accessories against the following list. Other components included in
this kit are not used for installation on this machine.
• The following junction harness (P/N: D1965265) is required to install the anti-condensation heater for
optional paper feed unit. If you have already ordered this harness for installing the other
anti-condensation heaters for mainframe or mainframe paper tray, it is not necessary to order this
junction harness again at this time.
For Installing the Heater:
No. Description Q’ty Remark
1 Anti-condensation heater 1
2 Harness with the isolation cap 1
3 M4 × 10: Screw 2
To Next Page
Loading...
