1.Installation
12
function to cancel a transmission from the Client-side Machine.
Order of Fax Connection Unit installation procedure:
1. Install the Fax Connection Unit in the Remote Machine (fax unit installed).
2. Install the Fax Connection Unit in the Client-side Machine (no fax unit installed).
3. Register the Client-side Machine in the Remote Machine.
• Do not register the Remote Machine before the Client-side Machine is registered in the Remote
Machine. Otherwise, registering the Remote Machine fails.
4. Register the Remote Machine in the Client-side Machine.
Installing the Fax Connection Unit in the Client-side and Remote Machines
1. Remove the SD card slot cover [A] from the SD card slots.
2. Insert the SD card (Fax Connection Unit Type M28) in SD slot 1 (upper) with its label face towards the front
of the machine if SD slot 1 is vacant. If slot 1 is not vacant, follow “Moving a Fax Communication
application into an SD card in SD slot 1” described below.
3. Plug in, and then turn ON the main power.
4. Press [Firmware Version] in the [Administrator Tools].
[User Tools] > [Machine Features] > [System Settings] > [Administrator Tools]
5. Check whether the aics version is displayed.
Moving a Fax Communication application into an SD card in SD slot 1
To Next Page
Loading...
