Ricoh MP C307 User Manual

2.Replacement and Adjustment
21
9. Attach the battery jumper switch [A] on the removed FCU board to switch to the Restore mode.
This jumper switch is provided with the new FCU board.
10. Connect the other end of the FFC to CN603 of the removed FCU board.
• When inserting the FFC, lift the lever to release the lock and then push the lever to lock.
• Make sure that the blue tapes of the FFC face left and it is not slanted.
11. Turn ON the main power.
12. SRAM data transmission starts. When the transmission is completed, you will hear a beeper sound.
• The beeper sound is the same volume as the speaker sound.
• The beeper sounds even if the speaker sound is turned off.
• If the beeper does not sound, cycle the main power on and off repeatedly and do the transmission
procedure 2 or 3 times.
• If the beeper does not sound after turning the main switch on and off 3 times, you need to input the
settings stored in SRAM memory manually.

Ricoh MP C307 Specifications

General

Type	Multifunction Printer
Functions	Print, Copy, Scan, Fax
Print Technology	Laser
Print Resolution	1200 x 1200 dpi
Maximum Paper Size	A4
Duplex Printing	Yes
Scan Resolution	600 x 600 dpi
Mobile Printing	Apple AirPrint, Google Cloud Print, Mopria
Operating Systems Supported	Windows, Mac OS, Linux
Print Speed (Black)	30 ppm
Print Speed (Color)	30 ppm
Standard Paper Capacity	350 sheets
Supported Paper Sizes	A4, A5, A6, B5, B6, Letter, Legal
Scanner Type	Flatbed with ADF (Automatic Document Feeder)
Copier Speed (Black)	30 cpm
Copier Speed (Color)	30 cpm
Copy Resolution	Up to 600 dpi
Zoom Range	25% to 400%
Connectivity	Ethernet, USB
Max. Paper Capacity	1, 350 sheets
Display	10.1-inch color touchscreen