4.Service Tables
69
I-fax Switch 06 - Not used (do not change the settings)
I-fax Switch 07 - Not used (do not change the settings)
I-fax Switch 08 (SP No. 1-102-009)
No Function Comments
0-7 Memory Threshold for POP Mail Reception
This setting determines the amount of SAF (Store and Forward) memory. (SAF stores fax messages to
send later for transmission to more than one location, and also holds incoming messages if they cannot be
printed.) When the amount of SAF memory available falls below this setting, mail can no longer be
received; received mail is then stored on the mail server.
00-FF (0 to 1024 KB: HEX)
The hexadecimal number you enter is multiplied by 4 KB to determine the amount of memory.
I-fax Switch 09 (SP No. 1-102-010)
No Function Comments
0-
3
Not used Do not change the settings
4-
7
Restrict TX
Retries
This setting determines the number of retries when connection and transmission fails
due to errors.
01-F (1-15 Hex)
I-fax Switch 0A - Not used (do not change the settings)
I-fax Switch 0B - Not used (do not change the settings)
I-fax Switch 0C - Not used (do not change the settings)
I-fax Switch 0D (SP No. 1-102-014)
No Function Comments
0-1 Not used Do not change the settings
2-3 Select the signature when sending mail notification of the send results In response to IEEE2600.1.
Bit 2 Bit 3 Setting
0 0 No sign
0 1 No setting
1 0
Individual setting
1 1 Always sign
4-5 Select the signature when sending mail. In response to IEEE2600.1.
Bit 5 Bit 4 Setting
0 0 No sign
To Next Page
Loading...
