Controller Options
160
Installation Procedure
• Turn OFF the main power and unplug the power cord from the wall socket. If installing without
turning OFF the main power, an electric shock or a malfunction may occur.
You can only install one of the following network interfaces at a time:
• File Format Converter
• IEEE 1284 Interface Board
• IEEE 802.11a/g/n Interface Unit
• USB Device Server Option
• Extended USB board
• When you install this option on the main machine for the first time, the interface board must be
connected directly to your PC to set up the IP address and other network settings.
1. Remove the upper left cover [A].
To Next Page
Loading...
