Firmware Update (SD Card)
355
Code Contents Solutions
Administrator Tools has been set to [Prohibit] by
an administrator. Amend the setting to [Do not
Prohibit] and try again.
50 The results of the electronic authorization check
have rejected the update data.
• Install the correct ROM update data in the SD
card.
57 @Remote is not connected at the date/time
reserved for receiving the package firmware
update from the network.
• Check the @Remote connection.
58 Update cannot be done due to a reception route
problem.
• Check the @Remote connection.
59 HDD is not mounted.
• Check the HDD connection.
60 HDD could not be used during the package
firmware update.
• Try again.
• Replace the HDD if the download fails again.
61 The module ID for the package firmware update
is incorrect.
• Prepare the correct package files.
62 The configuration of the package firmware
update files is incorrect.
• Prepare the correct package files.
63 Reception fails due to the power off at the
reserved date/time of the remote firmware
update from the network.
• Update is to be done automatically when the next
reception time has elapsed.
64 Reception fails due to the power off at the
reserved date/time of the package firmware
update from the network.
• Reset the reservation date/time for the remote
update.
65 Reception fails due to the status error of the
machine at the reserved date/time of the remote
firmware update from the network.
• Update is to be done automatically when the next
reception time has elapsed.
66 Reception failed due to the status error of the
machine at the reserved date/time of the package
firmware update from the network.
• Reset the reservation date/time for the remote
update.
67 Acquisition of the latest version information
from the Gateway fails at the reserved date/time
of the remote firmware update from the network.
• Check that the network is connected correctly.
68 Acquisition of the latest version information
from the Gateway fails.
• Check that the network is connected correctly.
69 Download fails at the reserved date/time of the
remote firmware update from the network.
• Check that the network is connected correctly.
70 Package firmware download from the network
• Check that the network is connected correctly.