Firmware Update (Auto Remote Firmware Update)
378
Numbers set for the result history for SP7-520-051 to 060
No. Result Description
1 Downloading with SFU Cannot download or update because the machine is now
downloading the package for SFU.
2 HDD not installed Cannot download or update because the machine has no HDD.
3 Updating with SFU Cannot download or update because the machine is being updated
with SFU.
4 HDD error Cannot download or update because the HDD cannot be used.
5 Version information obtain error
Cannot download or update because the version information cannot
be obtained.
6 Update download error Cannot download or update because the update download failed.
In the non @Remote method, this shows that the download failed
because there was no proxy set.
7 Name resolution error Cannot download or update because the name cannot be resolved
upon downloading the update.
8 Auto update setting disabled The package has been downloaded but will not run the update
because SP5-886-111 (auto update setting) is disabled and
SP5-886-115 (auto download setting for SFU) is enabled.
9 Update prohibited time Cannot start to update because the auto update prohibited time
setting (SP5-886-112) is enabled and the time update initiated was
in the range of prohibited time (SP5-886-113 to 114).
Or the day which update was initiated was a day for which update
was prohibited (SP5-886-120).
10 Update postponed due to machine in
use
Cannot start update due to the following conditions when update
was initiated.
• The machine is in use by a user (the panel was used within 30
seconds)
• Machine offline for other reasons
• Operation prohibited
• Displaying SP/UP menu
• Firmware update is running with another method
• Configuration change prohibited
• Verifying the operation panel (smart panel)
11 Update cancelled by user Update was cancelled because a user selected "Cancel" in the
popup shown before starting the update.
12 Offline failed Cannot start to update because the machine is offline for other
reasons.
13 Update successful Update was started and successfully completed.
To Next Page
Loading...
Need help?
General
