Ricoh MP C307 - Page 670

3.SP Mode Tables
55
2-
143-
005
TM/ID Sensor Check Minimum: Front ENG* [ 0 to 5.5 / 0 / 0.01V ]
2-
143-
006
TM/ID Sensor Check Minimum: Center ENG* [ 0 to 5.5 / 0 / 0.01V ]
2-
143-
007
TM/ID Sensor Check Minimum: Rear ENG* [ 0 to 5.5 / 0 / 0.01V ]
2-
146-
005
TM-Sensor Check Result Number of Edge
Detection:Front
ENG* [ 0 to 16 / 0 / 1 ]
2-
146-
006
TM-Sensor Check Result Number of Edge
Detection:Center
ENG* [ 0 to 16 / 0 / 1 ]
2-
146-
007
TM-Sensor Check Result Number of Edge
Detection:Rear
ENG* [ 0 to 16 / 0 / 1 ]
2-
154-
002
Shad. Correct Setting Front End Area: Bk: LD1 ENG* [ 50 to 150 / 100 /
0.1% ]
2-
154-
003
Shad. Correct Setting Front End Area: Bk: LD2 ENG* [ 50 to 150 / 100 /
0.1% ]
2-
154-
005
Shad. Correct Setting Front End Area: Ma: LD1 ENG* [ 50 to 150 / 100 /
0.1% ]
2-
154-
006
Shad. Correct Setting Front End Area: Ma: LD2 ENG* [ 50 to 150 / 100 /
0.1% ]
2-
154-
007
Shad. Correct Setting Front End Area: Cy: LD1 ENG* [ 50 to 150 / 100 /
0.1% ]
2-
154-
008
Shad. Correct Setting Front End Area: Cy: LD2 ENG* [ 50 to 150 / 100 /
0.1% ]
2-
154-
009
Shad. Correct Setting Front End Area: Ye: LD1 ENG* [ 50 to 150 / 100 /
0.1% ]