3.SP Mode Tables
143
001
3-073-
002
TD Sensor Check: Display mu Count:C ENG* [ 0 to 65535 / 0 / 1 ]
3-073-
003
TD Sensor Check: Display mu Count:M ENG* [ 0 to 65535 / 0 / 1 ]
3-073-
004
TD Sensor Check: Display mu Count:Y ENG* [ 0 to 65535 / 0 / 1 ]
3-074-
001
ID Sensor Check: Exe All Sensors ENG [ 0 or 1 / 0 / 1 ]
3-075-
001
ID Sensor Check: Display Vsg reg(front) ENG* [ 0 to 5.5 / 0 / 0.01V ]
3-075-
002
ID Sensor Check: Display Vsg reg(center) ENG* [ 0 to 5.5 / 0 / 0.01V ]
3-075-
003
ID Sensor Check: Display Vsg reg(rear) ENG* [ 0 to 5.5 / 0 / 0.01V ]
3-075-
011
ID Sensor Check: Display Voffset(front) ENG* [ 0 to 5.5 / 0 / 0.01V ]
3-075-
012
ID Sensor Check: Display Voffset(center) ENG* [ 0 to 5.5 / 0 / 0.01V ]
3-075-
013
ID Sensor Check: Display Voffset(rear) ENG* [ 0 to 5.5 / 0 / 0.01V ]
3-100-
001
Toner End Detection: Set ON/OFF ENG* [ 0 or 1 / 0 / 1 ]
0: Detect
1: Not Detect
3-100-
002
Toner End Detection: Set NE Detection Select ENG* [ 0 or 1 / 0 / 1 ]
0: ALL
1: TE Sensor
3-101-
001
Toner Status: Display Bk ENG* [ 0 to 2 / 2 / 1 ]
3-101-
002
Toner Status: Display C ENG* [ 0 to 2 / 2 / 1 ]
3-101-
003
Toner Status: Display M ENG* [ 0 to 2 / 2 / 1 ]
3-101-
004
Toner Status: Display Y ENG* [ 0 to 2 / 2 / 1 ]
3-102-
001
Toner Remaining: Display Toner Supply Motor Drive
Time: Bk
ENG* [ 0 to 500 / 0 / 0.001g ]
3-102- Toner Remaining: Display Toner Supply Motor Drive ENG* [ 0 to 500 / 0 / 0.001g ]
To Next Page
Loading...
