Ricoh OR-C1 User Manual

2. Go into the SP mode and do SP2-801 (Developer Initialization).
3. Do SP5-181 and SP1-007-007 to set automatic paper size selection for the upper tray, lower
tray, and by-pass tray.
Upper Tray (Size Adjust Tray 1)
5-181-001 A4 LEF/LT LEF
[0 to 1 /
0 / 1]
0: ISO (A3, A4, A5, etc.)
1: USA (DLT, LT, EXE, etc.)
5-181-002 A3/DLT
5-181-003 B4/LG
5-181-004 B5LEF/ExeLEF
5-181-005 A5SEF/HLTSEF
Lower Tray (Size Adjust Tray 2)
5-181-006 A4 LEF/LT LEF
[0 to 1 / 0 / 1]
0: ISO (A3, A4, A5, etc.)
1: USA (DLT, LT, EXE, etc.)
5-181-007 A3/DLT
5-181-008 B4/LG
5-181-009 B5LEF/ExeLEF
By-Pass Tray (By-Pass Size Detection)
1-007-007 LTSEF/LG
[0 to 1 / 0 / 1]
0: ISO (A3, A4, A5, etc.)
1: USA (DLT, LT, EXE, etc.)
4. Enable the NIB and/or USB function.
• To enable the NIB function, enter the SP mode and set SP5-985-001 (On Board NIC) to
"1"(Enable).
• To enable the USB function, enter the SP mode and set SP5-985-002 (On Board USB) to
"1"(Enable).
5.
Exit SP mode.
6. Do some test copies to make sure that the machine operates correctly.
Data Overwrite Security
Do the following procedure if a customer wants to use this function.
1. Do SP5-878-1(Option Setup - Data Overwrite Security) and touch [EXECUTE].
2. Go out of the SP mode, turn off the operation switch, then turn off the main power switch.
2. Installation
40
2

Ricoh OR-C1 Specifications

General

Brand	Ricoh
Model	OR-C1
Category	Printer
Language	English