Ricoh OR-C1 User Manual

No. Type Details (Symptom, Possible Cause, Troubleshooting Procedures)
854 B
Wireless LAN board error 2
The board that holds the wireless LAN board can be accessed, but the wireless
LAN board (802.11b or Bluetooth) itself cannot be accessed while the machine is
operating
• Wireless LAN board has been removed during machine operation.
Check the wireless LAN board is installed correctly.
No. Type Details (Symptom, Possible Cause, Troubleshooting Procedures)
855 B
Wireless LAN board error 3
An error was detected for the wireless LAN board (802.11b or Bluetooth).
• Wireless LAN board defective
• Wireless board connection not tight
1.
Check the connection.
2. Replace the wireless LAN/Bluetooth card.
No. Type Details (Symptom, Possible Cause, Troubleshooting Procedures)
857 B
USB I/F Error
The USB driver is unstable and generated an error. The USB I/F cannot be used.
The USB driver can generate three types of errors: RX, CRC, and STALL errors.
Only the STALL error can generate this SC code.
• USB 2.0 disconnected
• Controller board defective
1.
Check the connection.
2. Replace the controller board.
No. Type Details (Symptom, Possible Cause, Troubleshooting Procedures)
858 A
Data encryption conversion error
A serious error occurred during data encryption.
Service Call Conditions
109
3

Ricoh OR-C1 Specifications

General

Brand	Ricoh
Model	OR-C1
Category	Printer
Language	English