To Next Page
J
Jason BarnesSep 6, 2025
Why does my Ricoh Printer show charge potential: Vd adjustment error (Y)?
- CColton HenrySep 6, 2025
If your Ricoh Printer displays a charge potential: Vd adjustment error (Y), replace the yellow charge roller unit.
Why does my Ricoh Printer show charge potential: Vd adjustment error (Y)?
If your Ricoh Printer displays a charge potential: Vd adjustment error (Y), replace the yellow charge roller unit.
How to wake up Ricoh Pro C5200s Printer when the display is off?
If your Ricoh Printer display is off, the machine is likely in Sleep mode. If you're using the standard operation panel, press the [Energy Saver] key or the [Check Status] key to exit Sleep mode. If you're using the Smart Operation Panel, simply touch the display panel.
What to do if Ricoh Printer misfeeds due to paper size?
If misfeeds occur frequently on your Ricoh Printer, it may be due to paper of undetectable size being loaded. Remove the misfed paper. If you load a paper size that is not selected automatically, you need to specify the paper size with the control panel.
How to fix frequent misfeeds on Ricoh Printer due to tray settings?
If you're experiencing frequent misfeeds on your Ricoh Printer, it could be because the tray's side or end fences are not set properly. Remove the misfed paper and check that the side or end fences are set correctly and that the side fences are locked.
How to resolve exposure potential: Vpl adjustment error (K) on Ricoh Pro C5200s?
If you are experiencing an exposure potential: Vpl adjustment error (K) on your Ricoh Printer, replace both the black photoconductor unit and the black charge roller unit.
Why can't my Ricoh Printer detect the original size?
If your Ricoh Printer cannot detect original size, it may be because the original is not placed, or the original placed on the exposure glass is a non-standard size. Place the original correctly. Specify the paper size. When placing an original directly on the exposure glass, the lifting/ lowering action of the ADF triggers the automatic original size detection process. Lift the ADF by 30 degrees or more.
How to fix toner supply motor error (K) on Ricoh Pro C5200s Printer?
If you encounter a toner supply motor error (K) on your Ricoh Printer, try taking out and reinserting the black toner. If the issue persists, consider replacing the black toner.
Why is the print image misaligned on my Ricoh Pro C5200s?
If the print image is not properly positioned on the paper with your Ricoh Printer, no direct solution is available.
How to prevent paper from bending when ejected from my Ricoh Printer?
If paper is bent when it is ejected from the finisher upper tray of your Ricoh Printer, change the output tray to the finisher shift tray.
How to fix print image position on my Ricoh Printer?
If the print image is not properly positioned on the paper with your Ricoh Printer, no direct solution is available.
General| Print Technology | Laser |
|---|---|
| Max Paper Size | 330.2 x 487.7 mm |
| Monthly Duty Cycle | 300, 000 pages |
| Print Speed | 65 ppm |
| Resolution | 1200 x 4800 dpi |
| Paper Input Capacity | 8, 250 sheets |
| Paper Weight | 52 to 360 gsm |
| Duplex Printing | Standard |
| Network Connectivity | Ethernet 10Base-T/100Base-TX/1000Base-T |
| Supported Media Sizes | A3, A4, A5, B4, B5 |
| Supported Media Types | Plain, Recycled, Coated, Envelope |
| Warm-up Time | Less than 5 minutes |
Learn to navigate and use both the Standard and Smart Operation Panels.
Install printer drivers and perform standard printing operations.
Learn to scan documents to network folders and send them via email.
Properly load various paper types into different trays, bypass, and interposers.
Follow procedures for adding toner and safely dispose of used toner.
Interpret status icons and indicator lamps for machine status and errors.
Identify and resolve common operational issues and error messages.