How to wake up Ricoh Pro C5200s Printer when the display is off?
If your Ricoh Printer display is off, the machine is likely in Sleep mode. If you're using the standard operation panel, press the [Energy Saver] key or the [Check Status] key to exit Sleep mode. If you're using the Smart Operation Panel, simply touch the display panel.
What to do if Ricoh Printer misfeeds due to paper size?
If misfeeds occur frequently on your Ricoh Printer, it may be due to paper of undetectable size being loaded. Remove the misfed paper. If you load a paper size that is not selected automatically, you need to specify the paper size with the control panel.
How to fix frequent misfeeds on Ricoh Printer due to tray settings?
If you're experiencing frequent misfeeds on your Ricoh Printer, it could be because the tray's side or end fences are not set properly. Remove the misfed paper and check that the side or end fences are set correctly and that the side fences are locked.
Why does my Ricoh Printer have frequent misfeeds because of finisher tray?
If your Ricoh Printer is experiencing frequent misfeeds, it could be due to a foreign object on the finisher tray. Remove the misfed paper and ensure that nothing is placed on the finisher tray.
How to resolve frequent misfeeds on Ricoh Pro C5200s due to staple cartridge?
If your Ricoh Printer is experiencing frequent misfeeds, it could be due to the staple cartridge not being set correctly. Set the staple cartridge properly.
What to do if my Ricoh Pro C5200s Printer shows an error message?
If your Ricoh Printer is showing an error, it may be because a function with the status "Error Occurred" in the [Check Status] screen is defective. Press [Check] in the function where the error occurred, read the displayed message, and take the appropriate action.
Why does my Ricoh Pro C5200s misfeed when printing envelopes?
If misfeeds occur when printing to envelopes on your Ricoh Printer, it's likely that the envelopes are curled. Make sure you fully flatten curled envelopes before you load them. Do not stack envelopes over the specified limit for the paper tray. If misfeeds still occur after the envelopes have been flattened, load envelopes on the tray one at a time and print them individually.
How to prevent Ricoh Printer misfeeds caused by curled paper?
If misfeeds occur frequently on your Ricoh Printer, it may be due to curled paper, which can cause misfeeds, soiled paper edges, or slipped positions while performing staple or stack printing. Flatten the paper with your hands to straighten out the curl. Load the paper upside down so that the curled edges face downward. Place the cut paper on a flat surface to prevent it from curling, and do not lean it against the wall.
How to prevent paper from bending when ejected from my Ricoh Printer?
If paper is bent when it is ejected from the finisher upper tray of your Ricoh Printer, change the output tray to the finisher shift tray.
How to fix print image position on my Ricoh Printer?
If the print image is not properly positioned on the paper with your Ricoh Printer, no direct solution is available.
General| Print Technology | Laser |
|---|---|
| Max Paper Size | 330.2 x 487.7 mm |
| Monthly Duty Cycle | 300, 000 pages |
| Print Speed | 65 ppm |
| Resolution | 1200 x 4800 dpi |
| Paper Input Capacity | 8, 250 sheets |
| Paper Weight | 52 to 360 gsm |
| Duplex Printing | Standard |
| Network Connectivity | Ethernet 10Base-T/100Base-TX/1000Base-T |
| Supported Media Sizes | A3, A4, A5, B4, B5 |
| Supported Media Types | Plain, Recycled, Coated, Envelope |
| Warm-up Time | Less than 5 minutes |
Learn to navigate and use both the Standard and Smart Operation Panels.
Install printer drivers and perform standard printing operations.
Learn to scan documents to network folders and send them via email.
Properly load various paper types into different trays, bypass, and interposers.
Follow procedures for adding toner and safely dispose of used toner.
Interpret status icons and indicator lamps for machine status and errors.
Identify and resolve common operational issues and error messages.
To Next Page
