To Next Page
S
Susan DelgadoAug 29, 2025
Why is the print image misaligned on my Ricoh Pro C5200s?
- WWyatt PenaAug 30, 2025
If the print image is not properly positioned on the paper with your Ricoh Printer, no direct solution is available.
Why is the print image misaligned on my Ricoh Pro C5200s?
If the print image is not properly positioned on the paper with your Ricoh Printer, no direct solution is available.
How to avoid wrinkling when folding large paper on my Ricoh Printer?
If wrinkling occurs when gate fold, letter fold-in, or letter fold-out is applied on your Ricoh Printer, it can occur if these folds are applied to B4 JIS, A3, 8 1/ " 14", 2 11" 17", 12" 18", 8K, or larger sizes of paper. When applying these folds to paper larger than A4, it is recommended to enable image reduction and use paper no larger than A4.
Why does my Ricoh Pro C5200s Printer say the output tray is full when Z-folding?
If, when you print Z-folded paper, the machine indicates that the output tray is full even though the amount of output paper on the tray is less than the stack capacity on your Ricoh Printer, it is because the Z-fold support tray is not set. Set the Z-fold support tray for the finisher or multi-folding unit.
What to do if my Ricoh Printer is not printing because of no paper?
If documents and reports aren't printing from your Ricoh Printer, it could be due to a lack of paper. Load paper into the printer.
Why is the fold position incorrect when letter folding on my Ricoh Pro C5200s Printer?
If the position of the fold is incorrect when letter fold-in is applied to a B5 JIS sheet on your Ricoh Printer, it is because multi-sheet fold has been specified when only one sheet is being printed. In [Finishing] on the initial copier screen, under [Folding Unit], select [Letter Fold-in]. Press [Change], and then set "Multi-sheet Fold" to [Off].
How to fix 'Cannot detect original size' error on Ricoh Pro C5200s?
If your Ricoh Printer cannot detect original size, it may be because the original placed on the exposure glass is a non-standard size. Place the original on the exposure glass again, facing the original down. If the machine still cannot detect the size of the original, specify the size manually - do not use Auto Paper Select mode or the Auto Reduce/Enlarge function.
Why can't my Ricoh Printer detect the original size?
If your Ricoh Printer cannot detect original size, it may be because the original is not placed, or the original placed on the exposure glass is a non-standard size. Place the original correctly. Specify the paper size. When placing an original directly on the exposure glass, the lifting/ lowering action of the ADF triggers the automatic original size detection process. Lift the ADF by 30 degrees or more.
How to fix toner supply motor error (K) on Ricoh Pro C5200s Printer?
If you encounter a toner supply motor error (K) on your Ricoh Printer, try taking out and reinserting the black toner. If the issue persists, consider replacing the black toner.
How to resolve toner supply motor error (C) on Ricoh Printer?
If your Ricoh Printer displays a toner supply motor error (C), the suggested solution is to remove and then reinsert the cyan toner. If the error continues, replace the cyan toner.
What to do if Ricoh Printer shows toner supply motor error (M)?
To address a toner supply motor error (M) on your Ricoh Printer, you can try removing and reinserting the magenta toner. If this doesn't solve the problem, replace the magenta toner.
General| Print Technology | Laser |
|---|---|
| Max Paper Size | 330.2 x 487.7 mm |
| Monthly Duty Cycle | 300, 000 pages |
| Print Speed | 65 ppm |
| Resolution | 1200 x 4800 dpi |
| Paper Input Capacity | 8, 250 sheets |
| Paper Weight | 52 to 360 gsm |
| Duplex Printing | Standard |
| Network Connectivity | Ethernet 10Base-T/100Base-TX/1000Base-T |
| Supported Media Sizes | A3, A4, A5, B4, B5 |
| Supported Media Types | Plain, Recycled, Coated, Envelope |
| Warm-up Time | Less than 5 minutes |
Learn to navigate and use both the Standard and Smart Operation Panels.
Install printer drivers and perform standard printing operations.
Learn to scan documents to network folders and send them via email.
Properly load various paper types into different trays, bypass, and interposers.
Follow procedures for adding toner and safely dispose of used toner.
Interpret status icons and indicator lamps for machine status and errors.
Identify and resolve common operational issues and error messages.
