13 mm (0.5 inches) Wide Roller Marks Appearing on the Leading Edge of Paper Delivered Face
Down.......................................................................................................................................................... 237
Toner Stains like Roller Marks (after Continuous Large Volume Printing on Coated Paper)...............238
Vertical White Streak Roller Marks..........................................................................................................239
White Spots or Scratches due to Paper Dust.......................................................................................... 241
White Streaks of Stains Appearing when Feeding Dark-Color Paper after White Coated Paper.....242
Paper Jam.......................................................................................................................................................243
Frequent Paper Misfeeds..........................................................................................................................243
Useful Functions for Determining the Cause of a Paper Jam (without Purging)....................................244
J033/J082 Appears................................................................................................................................ 244
J033 / J034 / J083 (Paper Jam at the Fusing Unit during Solid-Fill Image Printing)........................ 246
Paper Jams Occur with Crumpling of the Leading Edge When Thin Paper Is Used............................252
J048 Appears............................................................................................................................................254
J080 Appears............................................................................................................................................257
Paper Bending or Paper Jams (J034 / J035 / J036 / J084 / J085 / J086)...................................258
Skew............................................................................................................................................................... 260
J097 (Excessive Skew)............................................................................................................................. 260
J098 (Shifting)........................................................................................................................................... 262
9. Related to Paper Feeding and Delivery (Main/Buffer Pass Unit)
Roller Marks Appearing When Dark-Color Paper Is Fed after White Paper...........................................265
Roller Marks Appearing When Dark-Color Paper is Fed after White Paper.......................................265
10. Troubles Related to Paper Feeding and Delivery (Vacuum Feed LCIT RT5150)
Vacuum Feed LCIT RT5150..........................................................................................................................267
Common Troubleshooting........................................................................................................................ 267
Double Feeding (J099, J470, J471, J485, J486, J500, J501).......................................................... 267
Paper Misfeeds (J430, 431, 445, 446, 460, 461).............................................................................270
Excessive Skew/Shifting (J097, J098)................................................................................................... 273
Attaching the Side Fences and End Fence Correctly..............................................................................276
Attaching the Small Tab End Fence to the Wide Large Capacity Tray.................................................279
Attaching the Tab Fence in the Wide Large Capacity Tray...................................................................279
Attaching the Side Fences, Auxiliary Side Fence, and End Fence (for Long Paper)........................... 279
Measuring the Curl / Decurling...............................................................................................................280
Cleaning the Vacuum Feed LCIT RT5150...............................................................................................281
5
To Next Page
Loading...
