1214-08: Paper Transfer Output: FC/FCS: Side 2: AC
1214-11: Paper Transfer Output: FCS: Side 1: AC
1214-12: Paper Transfer Output: FCS: Side 2: AC
1214-21: Paper Transfer Output: S: Side 1: AC: Clear/Special
1214-22: Paper Transfer Output: S: Side 1: AC: White
1214-23: Paper Transfer Output: S: Side 1: AC: Metallic
1214-25: Paper Transfer Output: S: Side 2: AC: Clear/Special
1214-26: Paper Transfer Output: S: Side 2: AC: White
1214-27: Paper Transfer Output: S: Side 2: AC: Metallic
2. Print the image. Has the problem been resolved?
Yes Proceed to Step 6.
No Repeat the adjustment of the paper transfer output.
3. Check to see if white spots occur.
Yes Proceed to Step 6.
No Finished!
6. Select the best setting from among those with which you have printed.
(b) Execute Toner Refreshing.
1. Print 30 sheets of solid-fill images with 100% density for each color of CMYK.
(c) Adjust the paper transfer setting
1. Register the paper in the custom paper profile.
2. In [Detailed settings] for custom paper, adjust the paper transfer output in 1214: [Paper
Transfer Output].
• 1214-01: Paper Transfer Output: BW: Side 1
• 1214-02: Paper Transfer Output: BW: Side 2
• 1214-05: Paper Transfer Output: FC/FCS: Side 1
• 1214-06: Paper Transfer Output: FC/FCS: Side 2
• 1214-09: Paper Transfer Output: FCS: Side 1
• 1214-10: Paper Transfer Output: FCS: Side 2
• 1214-13: Paper Transfer Output: S: Side 1: Clear/Special
• 1214-14: Paper Transfer Output: S: Side 1: White
Uneven Density
77
To Next Page
Loading...
