Rigol DS2000E Series Programming Guide

2 Command System RIGOL
DS2000E Programming Guide
2-109
:FUNCtion:WREPlay:INTerval
Syntax
:FUNCtion:WREPlay:INTerval <interval>
:FUNCtion:WREPlay:INTerval?
Description
Set or query the time interval in waveform playback, and the unit is s.
Parameter
Name Type Range Default
<interval> Real 100ns to 10s 100ns
Return Format
The query returns the time interval in waveform playback in scientific notation.
:FUNCtion:WREPlay:FSTart
Syntax
:FUNCtion:WREPlay:FSTart <frame>
:FUNCtion:WREPlay:FSTart?
Description
Set or query the start frame of waveform playback.
Parameter
Name Type Range Default
<frame> Integer 1 to the number of frames recorded 1
Explanation
 For the number of frames recorded, please refer to the
:FUNCtion:WREPlay:FMAX? command.
 The start frame of waveform playback should be lower than or equal to the end frame of waveform
playback (please refer to the
:FUNCtion:WREPlay:FEND command).
Return Format
The query returns the start frame of waveform playback in integer.

Rigol DS2000E Series Specifications

General

Bandwidth	70 MHz to 200 MHz
Channels	2 or 4
Vertical Sensitivity	1 mV/div to 10 V/div
Vertical Resolution	8-bit
Timebase Range	2 ns/div to 50 s/div
Memory Depth	14 Mpts
Input Impedance	1 MΩ ± 1%
Trigger Modes	Edge, Pulse, Video
Waveform Capture Rate	50, 000 wfm/s
Interfaces	USB, LAN
Power Supply	100-240 VAC
Display	8-inch WVGA (800x480) LCD