Rigol DS2000E Series

2 Command System RIGOL
DS2000E Programming Guide
2-119
:FUNCtion:WANalyze:CANCel
Syntax
:FUNCtion:WANalyze:CANCel
Description
Give up the waveform analysis.
Explanation
After stopping the waveform analysis, you can use the
:FUNCtion:WANalyze:STARt command to restart
the waveform analysis.
:FUNCtion:WANalyze:PREVious
Syntax
:FUNCtion:WANalyze:PREVious
Description
Locate the error frame previous to the current error frame.
:FUNCtion:WANalyze:NEXT
Syntax
:FUNCtion:WANalyze:NEXT
Description
Locate the error frame next to the current error frame.
:FUNCtion:WANalyze:EFCount?
Syntax
:FUNCtion:WANalyze:EFCount?
Description
Query the total number of error frames discovered in the current analysis.
Explanation
The number of error frames is related to the error frame threshold currently set.
Return Format
The query returns the total number of error frames in integer.