Rigol DS2000E Series - Page 55

2 Command System RIGOL
DS2000E Programming Guide
2-39
Return Format
The query returns the vertical offset of SPI decoding on the specified bus in integer.
:BUS<n>:SPI:TIMeout:TIME
Syntax
:BUS<n>:SPI:TIMeout:TIME <val>
:BUS<n>:SPI:TIMeout:TIME?
Description
Set or query the timeout time of SPI decoding on the specified bus. The default unit is s.
Parameter
Name Type Range Default
<n> Discrete {1|2} --
<val> Real 100ns to 1s 1us
Return Format
The query returns the timeout time of SPI decoding on the specified bus in scientific notation.