Rigol DS2000E Series - Page 65

2 Command System RIGOL
DS2000E Programming Guide
2-49
:CALCulate:SUB:INVert
Syntax
:CALCulate:SUB:INVert <bool>
:CALCulate:SUB:INVert?
Description
Enable or disable the inverted display of the subtraction operation result; or query the current status of
the inverted display of the subtraction operation result.
Parameter
Name Type Range Default
<bool> Bool {{1|ON}|{0|OFF}} 0|OFF
Return Format
The query returns 1 or 0.
:CALCulate:SUB:VSCale
Syntax
:CALCulate:SUB:VSCale <scale>
:CALCulate:SUB:VSCale?
Description
Set or query the vertical scale of the subtraction operation result. The unit is related to the amplitude unit
of the signal source channel.
Parameter
Name Type Range Default
<scale> Real
The default range is from 1pV to 200V.
The actual range is related to the vertical scale of the signal
source channel.
2V
Note: For the channel vertical scale, refer to the :CHANnel<n>:SCALe command.
Return Format
The query returns the vertical scale of the subtraction operation result in scientific notation.