Rigol DS2000E Series

RIGOL 2 Command System
2-52 DS2000E Programming Guide
:CALCulate:MULTiply:INVert
Syntax
:CALCulate:MULTiply:INVert <bool>
:CALCulate:MULTiply:INVert?
Description
Enable or disable the inverted display of the multiplication operation result; or query the current status of
the inverted display of the multiplication operation result.
Parameter
Name Type Range Default
<bool> Bool {{1|ON}|{0|OFF}} 0|OFF
Return Format
The query returns 1 or 0.
:CALCulate:MULTiply:VSCale
Syntax
:CALCulate:MULTiply:VSCale <scale>
:CALCulate:MULTiply:VSCale?
Description
Set or query the vertical scale of the multiplication operation result.
Parameter
Name Type Range Default
<scale> Real
The default range is from 50nU to 10MU.
The actual range is related to the vertical scale of the signal
source channel.
2U
Note: For the channel vertical scale, refer to the :CHANnel<n>:SCALe command.
Return Format
The query returns the vertical scale of the multiplication operation result in scientific notation.