RKC INSTRUMENT RB Series User Manual

8. PARAMETER DESCRIPTION
IMR02C15-E4
8-56
 Example of automatic conversion
• Decimal point position moves in accordance with the setting change.
Example: When the setting of the Decimal point position (PGdP) is changed from 1 (One decimal
place) to 0 (no decimal place) with Input scale high (PGSH) set to 400.0 °C:
Digits to the right of the decimal point
are rounded off.
• Values of parameters related to Input scale high (PGSH) change automatically in accordance with the
change in value of Input scale high (PGSH).
Example: When Input scale high (PGSH) changes from 400.0 °C to 200.0 °C
The value of the Setting limiter high
automatically changes to 200.0 °C.
• Values of parameters related to Communication protocol selection (CMPS) automatically in
accordance with the change from RKC communication to Modbus.
Example 1: When Device address is “0”
For Modbus, the Device address
automatically sets to “1” as address
number “0” is not available in Modbus.
Example 2: When the Data bit configuration is “7 (data 8-bit, without parity, stop 2-bit)”
For Modbus, the data bit configuration
automatically changes to “0 (data 8-bit,
without parity, stop 1 bit)” as the data bit 7
is not available in Modbus.
PGSH
$
400
.
0
SV1
Input scale high
PGSH
$
0400
SV1
OUT1 OUT2 AT DO1 DO2
MAN STOP DO3 DO4
OUT1 OUT2AT DO1 DO2
MAN STOP DO3 DO4
SLH
$
400
.
0
SV1
Setting limiter (high)
SLH
$
200
.
0
SV1
OUT1 OUT2 AT DO1 DO2
MAN STOP DO3 DO4
OUT1 OUT2AT DO1 DO2
MAN STOP DO3 DO4
ADD
0000
SV1
Device address
ADD
0001
SV1
OUT1 OUT2 AT DO1 DO2
MAN STOP DO3 DO4
OUT1 OUT2AT DO1 DO2
MAN STOP DO3 DO4
BIT
0007
SV1
Data bit configuration
BIT
0000
SV1
OUT1 OUT2 AT DO1 DO2
MAN STOP DO3 DO4
OUT1 OUT2AT DO1 DO2
MAN STOP DO3 DO4

RKC INSTRUMENT RB Series Specifications

General

Brand	RKC INSTRUMENT
Model	RB Series
Category	Temperature Controller
Language	English