8. PARAMETER DESCRIPTION
IMR02C15-E4
8-120
Dummy
F41
Event 1 interlock
F42
Event 2 interlock
F43
Event 3 interlock
F44
Event 4 interlock
Use to select the Interlock function for the Event 1.
Use to select the Interlock function for the Event 2.
Use to select the Interlock function for the Event 3.
Use to select the Interlock function for the Event 4.
Data range Factory set value
0: Unused (OFF)
1:
Used
0
Related parameters
Mode switching
• Interlock release (P. 8-11)
Parameter setting mode
• Event 1 set value (EV1) to Event 4 set value (EV4) (P. 8-20)
• Event 1 set value (EV1) [high] to Event 4 set value (EV4) [high] (P. 8-20)
• Event 1 set value (EV1’) [low] to Event 4 set value (EV4’) [low] (P. 8-22)
Engineering mode:
• Event 1 type to Event 4 type (P. 8-101)
• Event 1 hold action to Event 4 hold action (P. 8-110)
• Event 1 differential gap to Event 4 differential gap (P. 8-113)
• Event 1 output action at input burnout to Event 4 output action at input
burnout (P. 8-115)
• Energized/De-energized of Event 1 output to Energized/De-energized of
Event 4 output (P. 8-116)
• Event 1 timer to Event 4 timer (P. 8-118)
EIL1
EIL2
EIL3
EIL4
To Next Page
Loading...
