8. PARAMETER DESCRIPTION
IMR02C15-E4
8-129
Dummy
F51
Time setting of proportional cycle time [heat-side]
Time setting of proportional cycle time [cool-side]
Time setting of proportional cycle time [heat-side]:
When Proportional cycle time [heat-side] is set to 0 second in the Parameter
setting mode, this setting item becomes valid for the Proportional cycle time
[heat-side].
Time setting of proportional cycle time [cool-side]:
When Proportional cycle time [cool-side] is set to 0 second in the Parameter
setting mode, this setting item becomes valid for the Proportional cycle time
[cool-side].
Data range Factory set value
0: 0.1 second (fixed)
1: 0.25 second (fixed)
2: 0.5 second (fixed)
2
Related parameters
Parameter setting mode:
• Proportional cycle time [heat-side] (P. 8-36)
• Proportional cycle time [cool-side] (P. 8-39)
TU
tU
To Next Page
Loading...
Need help?
General
