RKC INSTRUMENT RB Series - Rb900

2. MOUNTING
IMR02C15-E4
2-5
Panel thickness: 1 to 10 mm
(When mounting multiple RB series controllers close together, the panel strength should be checked to
ensure proper support.)
 RB900
(Unit: mm)
*1 Case rubber packing (optional) [Waterproof/Dustproof]
*2 Terminal cover (optional) [sold separately]
*3 To keep the instrument as waterproof as possible, make sure that the panel surface has no burr or distortion where the
hole is to be cut out.
*4 Remove the case rubber packing. When the RB series is mounted closely protection will be compromised and they will
not meet IP66 (NEMA4X) standards.
*2
91.8
7.9
60
70.1
1
*1
91.8
106.1
96
96
25 92
+0.8
0
L1
+
0.8
0
92
+0.8
0
92
+0.8
0
Individual mounting
*3
Close horizontal mounting
*4
L1 = 96×n
−
4
n = Number of controllers (2 to 6)
30