RKC INSTRUMENT RB Series - Function Block 10 (F); Manual Manipulated Output Value (MV)

8. PARAMETER DESCRIPTION
IMR02C15-E4
8-86
Dummy
Function block 10 (F10)
This is the first parameter symbol of Function block 10 (F10).
F10
Manual manipulated output value (MV)
Link to the Manual manipulated output value (MV) in the Parameter setting
mode and Measured value (PV)/Manipulated output value (MV) in the SV
setting mode.
For details of Manual manipulated output value (MV), refer to
8.4.2 Parameter setting item (P. 8-42).
Related parameter
Parameter setting mode:
• Manual manipulated output value (MV) (P. 8-42)
F10.
M-MV