RKC INSTRUMENT RB Series User Manual

8. PARAMETER DESCRIPTION
IMR02C15-E4
8-85
Dummy
F09
F09 block selection (no display)
Hide parameter symbols of in the Parameter setting mode from the display.
Data range Factory set value
0: Display
1: No display
0
When “No display” is selected, the parameters of Parameter setting mode
are not displayed; however, F09 parameters are displayed.
For details of setting example, refer to 6.7 Display/No display Setting of
Mode Screens (P. 6-32, P. 6-37).
Related parameter
Parameter setting mode:
• PV bias (P. 8-41)
• PV digital filter (P. 8-41)
 Description of function
Hide parameters of the Parameter setting mode from the display. Each parameter of Parameter setting
mode link to the Engineering mode from F01 to F10. The parameters of the Parameter setting mode
linked to the parameters of the Engineering mode is not displayed when “No display” is set to F09
block selection. Those parameters of the Parameter setting mode link to F09 block of the Engineering
mode.
S . F09
Parameter setting mode
Parameter of the F09
block linked to the
Parameter setting mode.
Not displayed when set to
“1: No display” in
F09 block selection (no display).
Engineering mode
Function block 09 (F09)
PV bias
PV digital filter
F09 block selection
(
no dis
p
la
y)
PV bias
PV digital filter

RKC INSTRUMENT RB Series Specifications

General

Brand	RKC INSTRUMENT
Model	RB Series
Category	Temperature Controller
Language	English