RKC INSTRUMENT RB Series - Procedures of Mounting and Removing; The Mounting Position of Mounting Bracket; Rb100; Rb400

2. MOUNTING
2-6 IMR02C15-E4
2.3 Procedures of Mounting and Removing
 The mounting position of the mounting bracket
(1) Mounting positions for single controller
* If two mounting brackets are used on the Waterproof/Dustproof type controller as shown in
the figure (marked*), sufficient Waterproof/Dustproof performance cannot be obtained.
(2) Mounting positions for close mounting
When mounting closely, the controllers are not waterproof or dustproof.
RB100 RB400
RB700
RB500
RB900
RB100 RB400
RB700
RB500
RB900