RKC INSTRUMENT RB Series - Function Block 70 (F)

8. PARAMETER DESCRIPTION
IMR02C15-E4
8-136
Dummy
Function block 70 (F70)
This is the first parameter symbol of Function block 70 (F70).
F70
Setting change rate limiter unit time
Set the time unit for Setting change rate limiter (up/down).
Data range Factory set value
0: Minute
1: Hours
0
Related parameters
Parameter setting mode:
• Setting change rate limiter (up), Setting change rate limiter (down) (P. 8-66)
F70
Timer time unit
Set the time unit for Timer.
Data range
Factory set value
0: Min.: sec.
1: Hour: min.
0
Related parameters
Parameter setting mode:
• Timer 1 to Timer 4 (P. 8-63)
F70.
SVRT
TMU